6 Pair In-The-Wall Boot Dryer

New model for 6 pair In-The-Wall

A customer in Vermont needed a 6 pair and since it was a significant renovation, it could be any width and the studs framed to match.  So we made it.  Now you can have it too.

• Boots, shoes, gloves and helmets dry fast with forced gently warmed air. 
• Timer and heat on/off switch provide simple controls. 
• Constructed of durable stainless steel and aluminum. 
• A patented valve opens the air flow only to the open pegs so warm air is not wasted when pegs are closed. 
• Connects direct to building wiring so is best for installation as part of a renovation.
• Requires qualified electrician for installation.
  
• This design does not fit nicely between standard 16" wall studs.  Studs will need to be framed accordingly. 
• Can be customized with your choice of color or surface finish.
• Can be upgraded with Glove Spreader Y pegs

Includes:

• Stainless steel and aluminum construction with powder coat finish. 
• 12 stainless steel boot length pegs with protective plastic tips to direct air to toes of boots.
• Substitute Glove Spreader Y pegs as an option
  
• To be wired direct to building wiring. 
• Timer included on the face of the dryer.    
  
• Heat on/off switch
• Fan.
• Heater with dual temperature protection.  Max temp:  120 deg F (50C)
  

Dimensions: 57" high x 21 wide x 3.25" deep

Power:  110VAC 1200W   ( 220 V on request )